Chapter 1 Maintenance
4.2.3
Procedure in ft Server Utility
Use ft Server Utility menu and select the relevant component.
Perform the procedure below to clear MTBF information of component.
1. Select the target component.
2. Check Current state of the target component by selecting Refresh.
3. Select Show on MTBF INFORMATION of the target component.
4. Select Clear button in MTBF Clear of the target component.
5. Start the component.
Sample screen of ft Server Utility
If the Number of Faults in MTBF information on the screen of target component becomes
Tips
zero, MTBF information is cleared.
PCI Module
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
4. Maintenance of the Server
29