Procedure In Ft Server Utility - NEC Express5800 Series Maintenance Manual

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 1 Maintenance
4.5.3

Procedure in ft Server Utility

Use ft Server Utility menu and select the relevant component.
Take the steps below to update BIOS of CPU module.
1. Save the BIOS image file for update in the /etc/opt/ft/BIOS.ROM directory in the server.
2. Select either one CPU module.
3. Check Current state of the target CPU module by selecting Refresh.
If the target CPU module is operating, stop it.
4. Select Update on Firmware of CPU module screen.
Sample screen of ft Server Utility
34
Important
To update BIOS of CPU module, a BIOS image file for updating needs to be stored on
the server.
CPU module
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
4. Maintenance of the Server

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exp320sExpress5800/r320e-e4Express5800/r320e-m4Exp320r

Table of Contents