NEC Express5800 Series Maintenance Manual page 117

Chapter 2 Configuring and Upgrading the System
5. Firmly hold the handle of the hard disk drive to install and insert the drive into the slot.
6. Slowly close the lever. When the lever is locked, you will hear a click sound.
7. Also insert other hard disk drive paired in same procedure. See Chapter2 (1.1 Available Disk
Configuration) about the hard disk drive paired.
8. See Chapter 2 (1. Hard Disk Drive Duplexing) to set the dual disk configuration.
9. Install the front bezel.

Note Insert the hard disk drive until the lever hook touches the server frame.

Check the direction of the lever. Insert the hard disk drive with the lever unlocked.
Important Be careful not to pinch your finger(s) between the lever and tray.
Check the hook of the lever is engaged with the frame.
Note
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
117