NEC Express5800 Series Maintenance Manual page 181

Chapter 3 Useful Features
(2)
Power Control Configuration submenu
Select [Power Control Configuration] from the Server menu, and press Enter to display the following screen.
For details of the options, see the following table.
Option
AC-LINK
Delay Time
State exhibited before the AC power is turned
In operation (DC power is on.)
Stopped (DC power is also off.)
Forced power-off*
* This is to press and hold down the POWER switch for 4 seconds or more. The power is forcibly turned
off.
Parameter
Stay Off
[Last State]
Power On
[50]-600
off
Stay Off
If an uninterruptible power supply (UPS) is used for automatic operation, set the
Tips
AC-LINK to [Power On].
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
Descriptions
Set the AC-LINK function. Set the server power state that
results when the AC power is supplied again after being
turned off once
(see the table below).
If Power On or Last State is set, the server starts after
the CPU/IO modules of both systems are installed (up to
180 seconds) in addition to the delay time of Power On
Delay Time.
Set the DC-ON delay time in seconds if the AC-LINK
setting is Power On or Last State.
AC-LINK setting
Last State
Off On
Off Off
Off Off
1. System BIOS
Power On
On
On
On
181