Offline Tools; Starting Offline Tools - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
11.

Offline Tools

Offline tools are used for maintenance, failure analysis, and the settings of the server.
11.1

Starting Offline Tools

Start up the offline tools at the following steps.
1. Turn on the peripheral devices and then the server.
2. Press <F4> key while the message below is displayed.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
3. Keyboard Selection Menu appears after POST completion.
The following menu is displayed, after choosing a keyboard type.
4. Choose Maintenance Utility or BMC Configuration to start each tool.
See the next section "11.2 Features of Offline Tools" for more information.
Off-line TOOL MENU
Maintenance Utility
BMC Configuration
Exit
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
11. Offline Tools
85