NEC Express5800 Series Maintenance Manual page 57

Chapter 1 Maintenance
Error Message
C11B BMC Mezzanine card is not
found.
C11C BMC Mezzanine partition
is invalid.
C11D BMC is in Forced Boot
Mode.
D483 BP SROM data invalid
BP SROM data read error Failed to read data in system
D484
D485 MB SROM data invalid
MB SROM data read error Failed to read data in CPU/IO board.
D486
Cause
BMC Mezzanine card is not installed.
A format error was detected in BMC
Mezzanine card.
Detected that BMC is in Forced Boot
Mode.
An invalid data was detected in system
backplane.
backplane.
An invalid data was detected in CPU/IO
board.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
Solution
Contact your sales representative.
Unplug the power cord, wait for at least 30
seconds, then restart the server. At that time,
check the jumper switch setting on
motherboard. If the same error is detected
repeatedly, contact your sales representative.
Contact your sales representative.
6. Error Messages
57