NEC Express5800 Series Maintenance Manual page 50

Chapter 1 Maintenance
(6)
ACCESS LED on optical disk drive
LED indication
Off
On
(7)
LEDs on Management LAN Connector and LAN connectors
LINK/ACT LED
LED indication
On (green)
Blinking (green)
Off
SPEED LED (Management LAN Connector)
LED indication
On (green)
Off
SPEED LED (1G LAN connector)
LED indication
On (amber)
On (green)
SPEED LED (10G LAN connector)
LED indication
On (amber)
On (green)
Off
50
Description
Optical disk is not accessed.
Optical disk is being accessed.
Description
Power is supplied to the server and hub, and they
are connected correctly ("LINK").
The network port is sending or receiving data (ACT).
Disconnected from network.
Description
Port is operating on 100BASE-T.
Port is operating on 10BASE-T.
Description
Port is operating on 1000BASE-T.
Port is operating on 100BASE-TX.
Description
Port is operating on 1000BASE-T.
Port is operating on 10GBASE-T.
Port is operating on 100BASE-TX.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
6. Error Messages
Action
–
–
Action
–
–
Check the condition and connection of
network cables.
Action
–
–
Action
–
–
Action
–
–
–