Check Before Adding An Optional Device - NEC Express5800 Series Maintenance Manual

Chapter 2 Configuring and Upgrading the System
5.1.2

Check Before Adding an Optional Device

The optional device that can be added may be limited by the version of the ft server control software of this
system.
If the optional device requires specific version number, take the following procedure before adding the devices.
1. Confirm the required ft Server Control Software's version, Refer to the User's Guide provided with the
device, check the NEC website, or contact your sales representative.
2. Verify the version of the ft Server Control Software on your system.
3. After confirming that the version of ft Server Control Software is appropriate to the optional device, add
the device onto the server.
For more information on how to verify the working ft Server Control Software version, refer to Chapter 1 (2.6
Installing Bundled Software) in Installation Guide.
112
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices