NEC Express5800 Series Maintenance Manual page 143

Chapter 2 Configuring and Upgrading the System
(2)
Installing Full Height PCI Card
1. Shut down the OS.
The server is automatically powered off.
2. Disconnect the power cords from the outlets.
3. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
4. Remove one screw that secures the PCI retension
latch and open the latch.
5. Remove three screws that secure the PCI riser card,
and remove the PCI riser card from the motherboard.
6. Remove one screw and open the PCI retention latch
of the PCI riser Card.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
PCI retention latch
PCI riser card
PCI retention latch
143