NEC Express5800 Series Maintenance Manual page 162

Chapter 3 Useful Features
(a) PCI Device Controller and Option ROM Settings submenu
Option
SAS Option ROM Scan
LAN Boot Mode
LANx Option ROM Scan
PCIx Slot Option ROM
162
Parameter
Disabled
[Enabled]
[PXE]
iSCSI
Disabled
[Enabled]
[Disabled]
Enabled
Note For a RAID Controller, LAN card (network boot), or Fibre Channel controller, if no
Hard Disk Drive on which an OS is installed is connected, set the option ROM for
that slot to Disabled.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
Descriptions
Enable or disable the option ROM SCAN for onboard
SAS.
Select the option ROM where the onboard LAN is
deployed. This appears only if the Boot Mode is
[Legacy].
Enable or disable the option ROM SCAN for onboard
LAN.
R320e-M4 x:1/2/3/4
R320e-E4 x:1/2
Enable or disable the option ROM on each PCI slot.
R320e-M4 X:1/2/3/4
R320e-E4 X:1/2
1. System BIOS
[ ]: Factory settings