NEC Express5800 Series Maintenance Manual page 130
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Configuring and Upgrading the System
6.
Push DIMM straight into the slot.
When the DIMM is inserted into the DIMM slot, the lever automatically closes.
7. Install the air duct.
8. Install the top cover of the CPU/IO module, and fix it with screws (3 pieces).
9. Install the CPU/IO module by referring to "5.4.2 Installing CPU/IO Module" in this chapter.
10. Connect the power cord.
11. Press the POWER switch, and turn the power ON.
12. Check the POST for an error message.
If an error message appears, record the message, and then refer to "Chapter 1 (6.2 POST Error
Message)".
130
Note
Pay attention to the DIMM direction. A notch is provided on the DIMM pin side to prevent
DIMM from being inserted wrongly.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
Advertisement
Table of Contents
