S/Pdif Connector; Lan Led Connector - DFI KS150-BT User Manual

S/PDIF Connector

S/PDIF
5
1
The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF port may be
mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear
of the system chassis then connect the audio cable to the S/PDIF connector. Make sure pin 1
of the audio cable is aligned with pin 1 of the S/PDIF connector.
Chapter 5 Ports and Connectors
Chapter 5

LAN LED Connector

The LAN LED connector is used to detect the connection state of RJ45 LAN ports when the
connection is made to an active network via a cable. The pin functions of the LAN LED con-
nector are listed below.
Pins Pin Assignment
LAN0_LED_1000-
1
LAN0_LED_LINK_ACT-
3
LAN1_LED_1000-
5
LAN1_LED_LINK_ACT-
7
34
LAN 2 State
LAN 2 State
LAN 1 State
LAN 1 State
8 7
1
2
Pins Pin Assignment
LAN0_LED_100-
2
+3.3V_standby
4
LAN1_LED_100-
6
+3.3V_standby
8
www.dfi .com