4. Slide the Panel PC through the hole until it is properly f tted against the panel.
5. Position the mounting clamps along the rear edges of the Panel PC, f tting them into the slits
that are around the Panel PC.
Mounting
clamp
White plastic
cap
6. The f rst and second clamps must be positioned and secured diagonally prior to mounting the
rest of the clamps. Tighten the clamp' s screw using an electric screwdriv er until the white
plastic cap touches the panel. Do not o ver tighten the screws to prev ent damaging the P anel
PC. The illustration below shows all clamps properly mounted.
Chapter 6 Mounting Options
Chapter 6
Slit for mounting
the clamp
Panel wall
39
283.00
www.df .com