Chapter 5 - Ports and Connectors
Bottom Panel I/O Ports
LAN 1
DVI-I
Power Switch
USB 3.0
DC-in
USB 2.0
The bottom panel I/O ports consist of the following:
•
1 12V DC-in jack
•
1 DVI-I port
•
2 RJ45 LAN ports
•
2 USB 2.0 ports
•
1 USB 3.0 port
•
1 Line-out jack
•
1 Power switch
•
4 COM ports
Chapter 5 Ports and Connectors
COM 1
COM 3
LAN 2
Line-out
COM 2
COM 4
Chapter 5
12V DC-in
DC-in
This jack provides maximum of 60W power and is considered a low power solution. Connect
a DC power cord to this jack. Use a power adapter with 12V DC output voltage. Using a volt-
age higher than the recommended one may fail to boot the system or cause damage to the
system board.
24
www.dfi .com