Panel Power Select; Backlight Power Select - DFI KS150-BT User Manual

Panel Power Select

JP19 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP19 match
the LCD panel's specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
Chapter 4 Jumper Settings
Chapter 4
6 5
4 3
2 1
1-2 On: +12V
5
6
3
4
2 1
3-4 On: +5V
JP19
6 5
4 3
2 1
5-6 On: +3.3V
(default)

Backlight Power Select

JP16 is used to select the power level of backlight control: +3.3V (default) or +5V.
Important:
Before powering-on the system, make sure that the power settings of JP16 match the
power specification of backlight control. Selecting the incorrect voltage will seriously
damage the backlight.
17
1 2 3
1-2 On: +3.3V
JP16
(default)
1 2 3
2-3 On: +5V
www.dfi .com