Water Tank - Siemens HB34D552 Series Instruction Manual

Water tank

Before each use
After every operation
12
All manuals and user guides at all-guides.com
When you open the appliance door, you will see
the water tank on the right hand side.
Only fill the water tank with fresh tap water or
with still bottled water. If your water is very hard,
we recommend that you use softened water.
For tap water with a high chloride content (> 40 mg/l),
use a low chloride, uncarbonated mineral water.
You can obtain information on your tap water from
your water supplier.
Before using for the first time, moisten the seal in the
tank cover with a little water.
Caution.
Do not fill the water tank with distilled water or any
other liquids. You may damage the appliance.
Fill the water tank.
1. Fill the water tank with cold water up to the "max."
mark.
2. Close the tank cover until you feel it engage.
3. Slide in the water tank until it engages.
Empty the water tank after each use.
1. Pull the water tank out of the appliance slowly,
keeping it horizontal, so that no remaining water
can drip out of the valve.
2. Empty out the water.
3. Thoroughly dry the water tank in the appliance and
the seal in the tank cover.