Siemens HB34D552 Series Instruction Manual page 37

2nd rinse
Removing the remaining
water
Cancelling descaling
Descaling the evaporator
dish only
All manuals and user guides at all-guides.com
After a short time, the
1. Thoroughly rinse out the cleaning sponge.
2. Remove the remaining water from the evaporator
dish using the cleaning sponge.
3. Press the † button.
The appliance starts rinsing. Once the descaling is
complete, ‹‹:‹‹ and
4. Press the † button and turn the operating mode
selector back to the Û setting.
Remove the remaining water from the evaporator
dish using the cleaning sponge. Wipe out the cooking
compartment using the cleaning sponge and then dry
with a soft cloth.
1. Press and hold the † button.
Descaling is cancelled.
To ensure that no descaling solution remains in the
appliance, it must be rinsed twice after a cancellation.
2. Press the † button.
¯
The symbol appears.
Proceed as described in the "1st rinse" section.
You can also use the Descale operating mode if you
do not wish to descale the whole appliance, but only
the evaporator dish in the cooking compartment.
Only difference:
1. Prepare a descaling solution by mixing 100 ml
water and 20 ml liquid descaler.
2. Completely fill the evaporator dish with descaling
solution.
3. Only fill the water tank with water.
4. Start the Descale operating mode as described.
You can also descale the evaporator dish manually,
without using the operating mode.
®
symbol appears again.
®
appear in the display.
37