Temperature And Humidity; Storage And Shipment; Table 3-18. Temperature And Humidity Specification; Table 3-19. Tape Drive Storage And Shipment Specifications - Tandberg Data SDLT 600 Product Manual

SDLT 600 Product Manual
3.3.2

Temperature and Humidity

The ambient operating environment for the tape drive may not exceed the limits shown in
(The specifications shown in the table are valid for both the internal and tabletop tape drives.)

Table 3-18. Temperature and Humidity Specification

Specification
Wet Bulb Temperature
Dry Bulb Temperature
Range
Temperature Gradient
Relative Humidity
Humidity Gradient
3.3.3

Storage and Shipment

The ambient storage and shipment environment for the tape drive may not exceed the limits shown in
Table 3-19. (The specifications shown in the table are valid for both the internal and tabletop tape
drives.)

Table 3-19. Tape Drive Storage and Shipment Specifications

Specification*
Wet Bulb Temperature
Dry Bulb Temperature
Temperature Gradient
Relative Humidity
Humidity Gradient
* Note that these specifications apply to the tape drive only. Media specifications are listed in
Media Specifications" on page
81-81184-02 REV A01
Operating Limits
25 °C (77 °F)
10 C to 40 C (50 F to 104 F)
11 C (20 °F)/hour (across range)
20% to 80% (non-condensing)
10%/hour
Storage
(Unpacked or Packed)
46 °C (114 °F)
–40 C to 66 °C (–40 °F to 150 °F)
20 °C (36 °F)/hour (across range)
10 to 95% (non-condensing)
10%/hour
3-16.
March 2004
Chapter 3: SDLT 600 Tape Drive Specifications
Non-Operating Limits
(Power On, No Tape Loaded)
25 °C (77 °F)
10 C to 40 C (50 F to 104 F)
15 C (27 °F)/hour (across range)
10% to 90% (non-condensing)
10%/hour
Shipping
46 °C (114 °F)
–40 °C to 66 °C (–40 °F to 150 °F)
20 °C (36 °F)/hour (across range)
10 to 95% (non-condensing)
10%/hour
"Recording
Table 3-18.
3-15