Dlttape Vs1 Data Cartridge; Data Cartridge Handling Guidelines; Data Cartridge Inspection Procedure - Tandberg Data SDLT 600 Product Manual

The SDLT 600 tape drive is backward read compatible with DLTtape VS1 data cartridges formatted in
the DLT VS 160 tape drive. Data backed up using a DLTtape VS1 data cartridge in a DLT VS160 tape
drive is retrievable using the SDLT 600 tape drive.
By following general handling procedures, conducting careful visual inspections of data cartridges on
a regular, ongoing basis, and being certain that you store data cartridges within their environmental
limits, you will greatly reduce any chance that you will experience problems with your data cartridges
or cause damage to your SDLT system. Respect your media as much as you do your data.
This appendix discusses to the DLTtape VS1 data cartridge; refer to
and Super DLTtape II data cartridge information.
Information in this appendix includes the following topics:

Data Cartridge Handling Guidelines

•

Data Cartridge Inspection Procedure

•
Data Cartridge Write-Protect Switch
•
Loading a Data Cartridge
•
Unloading a Data
•
B.1 Data Cartridge Handling Guidelines
Ensure your data cartridge backup solution performs reliably by following these general handling
guidelines:
Always keep each data cartridge in its protective plastic case when it is not in the tape drive.
•
When carrying data cartridges in their cases, always orient the cases so that the grooves in the
•
cases interlock. This prevents the cases from slipping apart and falling.
Never stack the data cartridges in a stack of more than five.
•
81-81184-02 REV A01

DLTtape VS1 Data Cartridge

Cartridge.
March 2004
A
PPENDIX
Appendix A for Super DLTtape I
B
B-1