Dut Measurement Using The Bnc Adapter - Keysight 42941A Operation And Service Manual

Operation
DUT Measurement

DUT Measurement Using the BNC Adapter

The BNC adapter is used to measure I/O terminals or cables that have BNC
connectors. It is also used as a mounting base for the alligator lead.
Figure 3-10 DUT Measurement Using the BNC Adapter
DUT Measurement Using the Clip Lead
Use the clip lead to measure devices with leads that are large or mounted on
the circuit board.
Figure 3-11 DUT Measurement Using the Clip Lead
24 Keysight 42941A Impedance Probe Kit