Specifications - Keysight 42941A Operation And Service Manual

Specifications

Specifications
4 Specifications
This chapter provides specifications of the 42941A test fixture.
Specifications
Applicable Instruments
Frequency
Maximum Voltage
Output Impedance
Operating
Environment
Non-operating
Environment
Dimensions
Weight
Safety Standards
For more information on impedance measurement accuracy at the
3.5-mm port and additional error factor, refer to the Operation Manual of the
Impedance Analyzer.
Keysight 42941A Impedance Probe Kit
Impedance Analyzer
40 Hz to 120 MHz
± 42 V peak max. (AC+DC)
25 Ω (Nominal) DC coupled
temp. –20 °C to +75 °C (except four-terminal pair connection
block)
0 °C to +55 °C (four-terminal pair connection block)
humidity 15% to 95% RH (@ wet bulb temp. < 40 °C)
temp. –40 °C to +70 °C
humidity ≤ 90% RH (@ wet bulb temp. < 65 °C)
350 (W) × 100 (H) × 280 (D) mm
(includes carrying case)
2400 g (four-terminal pair connection block 1000 g)
EN61010-1:1993 +A2:1995
IEC61010-1:1990 +A1:1992 +A2:1995
CSA C22.2 No.1010.1:1992
INSTALLATION CATEGORY I
POLLUTION DEGREE 2
INDOOR USE
5