Connecting The 42941A - Keysight 42941A Operation And Service Manual

Installation Guide

Connecting the 42941A

Connecting the 42941A
Follow the steps below to connect the 42941A to an Impedance Analyzer.
1. Join the 42941A four-terminal pair connection block to the test connectors
2. Turn the block's two fastening screws clockwise at the same time until the
Figure 1-1 Connecting the 42941A to an Impedance Analyzer
6
on the front panel of the Impedance Analyzer by gently matching the four
BNC connectors and securing screws of the block with the test connectors
and accessory mounting holes of the instrument until they come into
complete contact.
four-terminal pair connection block is secured firmly to the instrument.
Keysight 42941A Impedance Probe Kit