Keysight 42941A Operation And Service Manual page 11

Overview
Functions
Figure 2-3 Probe Adapters
Table 2-2 Probe Adapters
No.
4
5
6
7
8
9
Keysight 42941A Impedance Probe Kit
NAME FUNCTION
3.5-mm Short A short device used for the adapter setup.
3.5-mm Load A load device (50 Ω) used for the adapter setup.
Pin Probe Attached to the probe to measure implemented circuits,
mounted devices, and printed circuit patterns.
Ground Lead Attached to the pin probe to connect to the GND of the
DUT.
BNC Adapter Attached to the probe to measure devices and cables that
have BNC connectors.
Clip Lead Attached to the top of the BNC adapter by the probe to
measure mounted lead components or large devices.
11