Connecting The Probe Adapter; Connecting The Pin Probe - Keysight 42941A Operation And Service Manual

Operation

Connecting the Probe Adapter

Connecting the Probe Adapter
The probe adapters are furnished with the 42941A to measure DUTs of various
shapes and characteristics. Attach the appropriate probe adapter for your DUT.

Connecting the Pin Probe

Attach the pin probe to the 3.5-mm connector top of the probe and insert the
pin.
The pin is sharp and potentially hazardous to personnel. When using or
changing, handle the pin probe with care to prevent injury.
Figure 3-1 Connecting the Pin Probe
Keysight 42941A Impedance Probe Kit 15