Connecting A Probe; Figure 1-12 Connecting The Probe To The 8990B - Keysight 8990B Installation Manual

1 Getting Started

Connecting a Probe

1 Attach the probe connector to the 8990B video input channel as shown in the
Figure 1-12
2 To disconnect the probe, turn the connector head slowly to the left, then pull
42
following figure. Push it straight on until it latches into place. Turn the
connector head slowly to the right until you hear it click firmly in place.
Connecting the probe to the 8990B
the connector body away from the front panel of the 8990B without twisting it.
Keysight 8990B Installation Guide