2
Accessories
Probe Adapter
Description
The probe adapter fits over the tip of the probe and converts the probe input to a
50 W type-N male connector. The adapter is only used when performance testing
the probe.
Operating characteristics
Nominal input impedance
Frequency range
Inspection
Periodically inspect the threads of the adapter for signs of wear and damage.
Inspect the barrel of the probe receptacle, making sure it is clean and free of grit.
Clean the adapter threads or receptacle with clean compressed air.
24
50 W
Same as the active probe (300 kHz to 3 GHz)
Keysight 85024A User's and Service Guide