Kessel EasyClean SkimTech Basic Translation Of Original Instruction Manual page 69

9.6 Dismantling the system
1 The system shall be dismantled and transported only by personnel who are
authorised by the manufacturer.
1 Ensure that the system has been completely emptied and cleaned.
▶ Disconnect the inlet pipe and arrange a bypass around the system.
▶ Disconnect the connection between the coarse filter unit and the separator.
Secure the coarse filter unit with the help of a hoist attached to the load eyes.
Then carefully tilt and load onto the transport equipment. Transport only in
lying position.
▶ Proceed in a similar manner with the separator.
016-100_01 Installation and operating manual 69