Switch On The System - Kessel EasyClean SkimTech Basic Translation Of Original Instruction Manual

7.

Switch on the system

▶ Close the control unit housing cover.
▶ Connect the power cable to the mains.
▶ Set the main switch to the ON position.
✓ Initialisation starts automatically.
• The device checks the electrical components.
Operation of the Basic control units
The Basic control units have a time switch which controls the corresponding com-
ponent (sieve screw or skimmer unit). The components can also be set to manual
mode (5) as preparation for maintenance or for troubleshooting.
016-100_01 Installation and operating manual
2 3
1
6 5
Item no.
Operation of Basic control units
Fig. [9]
Main switch
(1)
Alarm LED (red)
(2)
Operating LED (green)
(3)
Acknowledge alarm
(4)
Manual operation
(5)
Manual operation LED (yellow)
(6)
4
57