Applying The Drill Jig For Proper Drilling - Assa Abloy Sargent FM6100 Series Installation Instructions Manual

FM6100 Series Multi-Point Lock

Applying the drill jig for proper drilling

5
Drill Guide
clamping screw
• Manually project the deadbolt by applying force to the
deadbolt lever toward the bottom of the shutter.
• The deadbolt lever is now in a position to allow the Drill Guide
Deadbolt
to be positioned above the deadbolt and fixed into position
Lever
using the two drill guide positioning holes provided in both
sides of the deadbolt case.
Drill Guide
Positioning
Holes
• The Drill Guide is an alligator type jig. Loosen the Drill Guides
clamping screw, allowing the jaws to rotate 90 degrees to
allow the guide to be positioned above the deadbolt and
Drill Guide
closed around the shutter so that the pins on both sides of
Positioning
the Drill Guide engage the two Drill Guide Positioning Holes.
Pins
• Once the Drill Guide is engaged in the positioning holes,
tighten the Drill Guides clamping screw so that it will firmly
secure the jig around the shutter.
Drill Guide
• Using the Drill Guide Hole, drill a 1/8" hole (drill provided
Hole
with Jig Components) through both sets of rods.
A8058:A • www.sargentlock.com
7