Operation; Parameters - Physiomed vocaSTIM-Master Operating Instructions Manual

2.3 Operation

Selecting a function (e.g. the current mode
you to level 2 of the menu. Here you can set the desired parameters for the selected
current mode.
The following functions are available on level 2:
The parameters of the menus
will be discussed later.

2.3.1 Parameters

The following paragraph will give you an overview of the meaning of the symbols in
the menus for the individual current modes.
In General
The symbols below apply for all current modes with low frequencies:
vocaSTIM - Master
®
) from the start menu (level 1) will lead
G
Memory menu; individual programs (single treatments
or current modes) can be memorised.
Prescriptions; here you are able to prescribe
treatments and check executed treatments (only with
inserted)
vocaCARD
Setup menu (settings)
Back to level 1
Therapy timer with selected therapy time; the
therapy current will be reduced to 0 and an
acoustic signal will be issued every 10 seconds
after the countdown.
Direct access
vocaCARD
Programs can be saved and called (only with
inserted)
vocaCARD
,
DIAGNOS. INDICAT.
Intensity display (mA), to be set with
intensity control <6>. The sign (plus/minus) signifies
the polarity of the red plug.
Exchange of polarity of the two electrodes;
the sign (plus/minus) of the intensity display will be
changed respectively.
Controls and Indicators
;
, , and
INDIVID. SETMENU TRAINER
9