Physiomed vocaSTIM-Master Operating Instructions Manual page 17

Current Mode MT
Diagnosis/Accommodation quotient
vocaSTIM - Master
®
5 pre-set frequency bands,
fixed frequency (SELECT 0 – 250 Hz)
Basic frequency (possible values: 2.0 – 9.5
kHz)
Intensity display, to be set with intensity control <6>
Tension time T (possible values: 1 to 60 s in steps of
1s;
manual release key (only if R > 1s)
Release time R (possible values: 1 to 60 s) in steps of
1s
Ramp (5 settings m - m
1
The current setting is displayed in the upper status
bar.
Modulation frequency (possible values: 0 -125 Hz)
Basic frequency (possible values: 2.0 – 9.5 kHz) The
current setting is displayed in the upper status bar.
Acoustic signal, makes every current pulse audible
Exchange of polarity of the two electrodes
the sign (plus/minus) of the intensity display will be
changed respectively.
Acoustic signal, makes every current pulse audible
Interrupt the emission of pulses
Pulse time (possible values: 1000 ms or 500 ms)
Confirmation that muscle contracted
Pulse shapes (possible shapes: square-wave pulse,
triangular pulse). Depending on the selected pulse
shape, another acoustic signal will be issued.
) with different rise times.
5
Calculation of the
accommodation quotient
Indication of the degree of
damage
Controls and Indicators
11