Physiomed vocaSTIM-Master Operating Instructions Manual page 38

Indications Menu
(9) Turn the intensity control <6> down to 0.
(10) The parameters for the second treatment section are set. You may select the
individual parameters to adjust them, if necessary.
(11) If the manual release key has not yet been connected, connect it to the
manual release key socket <11>.
(12) Attach the electrodes as described and slowly turn up the intensity using the
intensity control <6>. Instruct the patient to repeatedly emit pulses with the
manual release key, until a clear contraction is achieved.
Note The device is equipped with a safety control. If you turn up the
intensity to a value of more than 5 mA without having released a
pulse with the manual release key,
the display and an acoustic signal will be issued. Turn the intensity
control down to 0 and slowly turn it up again. Release pulses with the
manual release key.
(13) Select the indicated functional exercises on the provided CD and start the
treatment.
Note It is important that the patient repeats the exercises exactly as they are
on the CD and releases the stimulation pulse with the manual release
key exactly at the beginning of an exercise. The time between the
exercises is set according to the degree of damage, so that the
muscles are by no means overstressed.
(14) After the treatment has been finished, turn down the intensity control <6>
to 0, take off the electrodes and switch of the device.
32
will be flashing in
vocaSTIM -Master
®