Delete Program; Vocacard; Save Card Programs - Physiomed vocaSTIM-Master Operating Instructions Manual

7.3 Delete Program

Proceed as follows to delete a program:
(1) Select a current mode on the display <3>.
(2) Select the symbol programs
programs will be displayed.
(3) Select the program to be deleted
confirm.
(4) Select the symbol delete programs and confirm. The bin symbol starts
flashing.
(5) Select the position to be deleted and confirm. Now the program is deleted and
can be newly assigned. Proceed in the same manner to delete other positions.
(6) Exit the menu via

8 vocaCARD

The
vocaCARD
In contrast to the individual programs F1 to F25, the current modes are not saved in
the device but on a chipcard you may hand over to the patient. This ensures, that
the same patient always receives the same treatment. A sequence of two therapy
currents may be saved on the card and called consecutively.

8.1 Save Card Programs

Proceed as follows to save therapy currents on the
(1) Attach the electrodes on the area of treatment.
(2) Insert the
(3) Select a current mode from the display <3>.
(4) Set the required parameters for the current mode and the therapy time.
(5) Slowly turn up the intensity with the intensity control <6> so that it is pleasant
for the patient (preheating) or the desired muscle contraction is caused
(phonation exercise).
vocaSTIM - Master
®
.
allows you to save individual therapy modes for a particular patient.
with the chip on top into the card reader.
vocaCARD
and confirm. The menu individual
to with the data selector <5> and
F1 F25
vocaCARD
vocaCARD
:
35