Notes On Operation; Connection; Start-Up; Self-Test Routine - Physiomed vocaSTIM-Master Operating Instructions Manual

3 Notes on Operation

3.1 Connection

(1) Check whether the operating voltage of the device (see red window in the
mains module <1>) and the line voltage correspond.
(2) Plug the supplied mains lead firmly into the rear panel of the device (mains
module <1>) and connect it to the socket. A safe connection is established via
a grounding socket outlet with protective wire.

3.2 Start-up

(1) Make sure that the instrument is switched off.
(2) Turn the intensity control <6> down to 0.
(3) Plug the patient lead into the patient lead connector <10>.
(4) Switch on the device with the mains switch (mains module <1>).
The instrument will carry out an automatic self-test routine during which all
functions and output values are checked.
An audible signal is issued.
The instrument is ready now. You are in the start menu.

3.3 Self-test routine

(1) Turn the intensity control <6> down to 0.
(2) Switch the device off and on with the mains switch (mains module <1>).
The instrument will carry out an automatic self-test routine during which all
functions and output values are checked.
An audible signal is issued.
The instrument is ready now. You are in the start menu.
vocaSTIM - Master
®
Notes on Operation
17