Installing The Switch; Mounting The Engine - Seagull Models ZERO MS:123 Assembly Manual

ZERO.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Loctite secure.
1 PCS.
Rudder servo arm.
Elevator servo arm.
SERVO GEAR INSTALLATION.
Metal connector.
Servo for retractable only.
Rudder servo arm.
Elevator servo arm.
10
Adjustable Servo
connector.
Servo arm.
Throttle servo arm.
25mm.
Servo arm.
Throttle servo arm.
Stearing servo arm.
Instruction Manual.

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side, in the fuselage.
Trim and cut.
Switch.

MOUNTING THE ENGINE.

1) Position the engine with the drive washer
(150mm) forward of the firewall as shown.
150mm.
3/ 32" Hole.