Mounting The T Ail Wheel; Installing The Horizontal Stabilizer - Seagull Models ZERO MS:123 Assembly Manual

Instruction Manual.
ZERO.
M3x25mm.
Screw.
Screw.
M3x15mm.

MOUNTING THE T AIL WHEEL.

M3x15mm.

INSTALLING THE HORIZONTAL STABILIZER.

1) Using a ruler and a pen, locate the
centerline of the horizont al stabilizer, at the
trailing edge, and place a mark. Use a triangle
and extend this mark, from back to front,
across the top of the st abilizer. Also extend
this mark down the back of the trailing edge of
the stabilizer.
Draw center line.
24