Engine Mount Installation - Seagull Models ZERO MS:123 Assembly Manual

www.seagullmodels.com
Elevator control horn.
Balsa.
Epoxy.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install the
engine mount included with your model. .
4x30mm.
C/A glue.
2) Use four 4x30mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
C/A glue.
Balsa.
Thread locker glue.
Epoxy.
7