Device management
Device management overview
Device management functions enable you to check the operating status and configure the running
parameters of devices.
Configuring the device name
NOTE:
You can configure the device name in the web interface or the comand line interface (CLI).
Configuring the device name in the web interface
The current system name is on the very top of the navigation tree, as shown in
Figure 58 Current system name
Select Device Management > Device Basic > Device Basic Info from the navigation tree to enter the page,
as shown
inFigure
Figure 59 Device basic information
Configuring the device name in the CLI
A device name identifies a device in a network. If the device name is Sysname, the prompt of user view
is <Sysname>.
Follow these steps to configure the device name:
To do...
Enter system view
59.
Use the command...
system-view
87
Figure
58.
Remarks
—