Setting The Idle Timeout Timer; Setting The Idle Timeout Timer In The Web Interface - HP A-F1000-E Getting Started Manual

Configuration
[1], 2, 3 and 1
or [1], 3, 2 and
1

Setting the idle timeout timer

NOTE:
You can set the idle timeout timer in the web interface or the CLI.

Setting the idle timeout timer in the web interface

You can set the idle timeout timer for a logged-in user. If a logged-in user does not perform any operation
before the timer expires, the system logs the user off the web interface.
Select Device Management > Device Basic > Web Management from the navigation tree to enter the
page, as shown in
Figure 64 Web management
Table 8 Web management configuration items
Item
Idle timeout
System time configured
If "date-time" is not in the daylight
saving time range, the system time
configured is "date-time".
"date-time" is in the daylight saving
time range:
If the value of
"date-time"-"summer-offset" is not in
the summer-time range, the system
time configured is
"date-time"-"summer-offset";
If the value of
"date-time"-"summer-offset" is in the
summer-time range, the system time
configured is "date-time".
Figure 64.
Description
Set the idle timeout period for a logged-in user
Example
Configure: clock timezone zone-time add 1, clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2 and clock datetime 1:00 2007/1/1
System time configured: 01:00:00 zone-time Mon
01/01/2007
Configure: clock timezone zone-time add 1, clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2 and clock datetime 1:30 2008/1/1
System time configured: 23:30:00 zone-time Mon
12/31/2007
Configure: clock timezone zone-time add 1, clock
summer-time ss one-off 1:00 2008/1/1 1:00
2008/8/8 2 and clock datetime 3:00 2008/1/1
System time configured: 03:00:00 ss Tue
01/01/2008
95