Local User Configuration Example; Network Requirements - HP A-F1000-E Getting Started Manual

Figure 69 Add a local user
Table 10 Local user configuration items
Item
User Name
User Privilege Level
Service Type
Password
Confirm Password

Local user configuration example

Network requirements

As shown in
local authentication for the Telnet user.
Figure 70 Configure a local user account for a Telnet user
Configuration procedure
# Configure a local user.
Select User > Local User in the navigation tree and then click Add.
•
Description
Enter a username. A username is case sensitive, and cannot contain any of these
characters: "/", "\", ":", "|", "*", "?", "<", ">", "@" and """.
IMPORTANT:
A username may contain spaces. However, leading spaces and trailing spaces are
always ignored. An all-space input is considered null.
Set the user privilege level of the user.
Set the service type that the user can use, including FTP, SSH, Telnet, Terminal and PPP.
IMPORTANT:
For a user to log in to the Firewall through the web interface, you must select the service
type Telnet for the user.
Set the password
Reset the password, which must be the same with the previously set password.
Figure 70, configure a local user account on the firewall so that the firewall can perform
109