Configuring Scheme Authentication For Console Login - HP A-F1000-E Getting Started Manual

Configuration procedure
Follow these steps to configure password authentication for console login:
To do...
Enter system view
Enter console user interface view
Configure the authentication mode
as local password authentication
Set the local password
Configure common settings for
console login
When you log in to the device through the console port after configuration, you are prompted to enter a
login password. A prompt such as <HP> appears after you input the password and press Enter, as shown
in Figure 15.
Figure 15 Configuration page

Configuring scheme authentication for console login

Configuration prerequisites
You have logged in to the device.
Use the command...
system-view
user-interface console
first-number [ last-number ]
authentication-mode
password
set authentication password
{ cipher | simple } password
—
16
Remarks
—
—
Required
By default, you can log in to the device
through the console port without
authentication and have user privilege
level 3 after login.
Required
By default, no local password is set.
Optional
See "Configuring common settings for
console login (optional)."