Configuring Scheme Authentication For Modem Login - HP A-F1000-E Getting Started Manual

Figure 39 Configuration page

Configuring scheme authentication for modem login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration
When you log in to the device through modems, specify operating mode of the AUX interface is protocol.
Configuration procedure
Follow these steps to configure scheme authentication for modem login:
To do...
Enter system view
Enter AUX interface view
Specify operating mode for
the AUX interface
Exit to system view
Enter AUX user interface
view
Specify the scheme
authentication mode
requirements."
Use the command...
system-view
interface aux
interface-number
async mode { flow |
protocol }
quit
user-interface aux
first-number [ last-number ]
authentication-mode scheme
Remarks
—
—
Required
By default, the mode is flow.
—
—
Required
Whether local, RADIUS, or HWTACACS
authentication is adopted depends on the
configured AAA scheme.
By default, the modem login authentication
mode is password.
51