By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see
"Configuration
Configuration procedure
Follow these steps to configure password authentication for AUX login:
To do...
Enter system view
Enter one or more AUX
user interface views
Specify the password
authentication mode
Set the local password
Configure common
settings for AUX login
After the configuration, next time you log in to the device through the AUX port, you are prompted to
enter a login password. A prompt such as <HP> appears after you input the password and press Enter,
as shown in
Figure 26 Configuration page
Configuring scheme authentication for AUX login
Configuration prerequisites
You have logged in to the device.
requirements."
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode password
set authentication password
{ cipher | simple } password
—
Figure
26.
Remarks
—
—
Required
By default, you can log in to the device
through the AUX port with password
authentication and have user privilege level 0
after login.
Required
By default, no local password is set.
Optional
See
"Configuring common settings for AUX
login
(optional)."
36