HP A-F1000-E Getting Started Manual page 26

To do...
Configure the data
bits
Define a shortcut
key for enabling a
terminal session
Define a shortcut
key for terminating
tasks
Configure the flow
control mode
Configure the type
of terminal display
Configure the user
privilege level for
login users
Set the maximum
number of lines on
the next screen.
Set the size of
history command
buffer
Set the idle-timeout
timer
Use the
Remarks
command...
Optional
By default, the data bits of the console port is 8.
Data bits is the number of bits representing one
databits { 5 | 6 | 7
character. The setting depends on the contexts to be
| 8 }
transmitted. For example, you can set it to 7 if
standard ASCII characters are to be sent, and set it
to 8 if extended ASCII characters are to be sent.
Optional
activation-key
By default, you can press Enter to enable a terminal
character
session.
escape-key
Optional
{ default |
By default, you can press Ctrl+C to terminate a task.
character }
flow-control
{ hardware | none Optional
| software }
Optional
By default, the terminal display type is ANSI.
The device supports two types of terminal display:
ANSI and VT100. HP recommends you to set the
display type of both the device and the client to
terminal type
VT100. If the device and the client use different
{ ansi | vt100 }
display types (for example, hyper terminal or Telnet
terminal) or both are set to ANSI, when the total
number of characters of the currently edited
command line exceeds 80, an anomaly such as
cursor corruption or abnormal display of the
terminal display may occur on the client.
Optional
user privilege level
By default, the default command level is 3 for the
level
console user interface.
Optional
screen-length
By default, the next screen displays 24 lines.
screen-length
A value of 0 disables the function.
Optional
history-command
By default, the buffer saves 10 history commands at
max-size value
most.
Optional
The default idle-timeout is 10 minutes. The system
idle-timeout automatically terminates the user's connection if
minutes [ seconds ] there is no information interaction between the
device and the user within the idle-timeout time.
Setting idle-timeout to 0 disables the timer.
20