HP A-F1000-E Getting Started Manual page 121

To do...
Create a basic ACL and enter its
view, or enter the view of an
existing basic ACL
Create rules for this ACL
Exit the basic ACL view
Associate the HTTP service with the
ACL
Associate the HTTPS service with
the ACL
Logging off online web users
Follow this step to log off online web users:
To do...
Log off online web users
Source IP-based login control over web users configuration example
Network requirements
1.
As shown in
Figure 73 Network diagram for configuring source IP-based login control over web users
Configuration procedure
2.
# Create ACL 2000, and configure rule 1 to permit packets sourced from Host B.
<Firewall > system-view
[Firewall] acl number 2030 match-order config
[Firewall-acl-basic-2030] rule 1 permit source 10.110.100.52 0
# Associate the ACL with the HTTP service so that only web users from Host B are allowed to access the
Firewall.
[Firewall] ip http acl 2030
Use the command...
free web-users { all | user-id
user-id | user-name user-name }
Figure 73, configure the Firewall to allow only web users from Host B to access.
Use the command...
acl [ ipv6 ] number acl-number
[ match-order { config | auto } ]
rule [ rule-id ] { permit | deny }
[ source { sour-addr sour-wildcard
| any } | time-range time-name |
fragment | logging ]*
quit
ip http acl acl-number
ip https acl acl-number
115
Remarks
Required
By default, no basic ACL exists.
Required
—
Required
Use either command.
Remarks
Required
Execute the command in user interface view.