Configuring Banners - HP A-F1000-E Getting Started Manual

login banner—Login welcome information, displayed when password or scheme authentication is
•
configured.
• motd (Message of the Day) banner—Welcome information displayed before authentication.
legal banner—Also called license information, displayed when a user logs in. If entering Y or
•
pressing the Enter key, the user enters the authentication or login process. If entering N, the user
quits the authentication or login process. Y and N are case insensitive.

Configuring banners

Follow these steps to configure banners:
To do...
Enter system view
Configure the incoming banner (for Modem login users)
Configure the login banner
Configure the legal banner
Configure the shell banner (for non Modem login users)
Configure the motd banner
The system supports single-line input and multiple-line input for configuring a banner.
Single-line input
In single-line input mode, all banner information is input in the same line. The start and end characters
of the input text must be the same and are not part of the banner information. The input text, together with
the command keywords, cannot exceed 510 characters. In this mode, do not press Enter after typing the
banner information. For example, to configure a banner like "Have a nice day.", use the following
command:
<System> system-view
[System] header shell %Have a nice day.%
Multiple-line input
In multiple-line input mode, you can press Enter to separate the banner information in multiple lines. In
this case, up to 2000 characters can be typed.
Multi-line input can be performed with the following methods:
Method I—Press the Enter key directly after the command keywords, type the banner information,
•
and finish your setting with the % character. The % character is not part of the banner information.
For example, to configure a banner like "Have a nice day. Please input the Password!", use the
following commands:
<System> system-view
[System] header shell
Please input banner content, and quit with the character '%'.――System prompt
Have a nice day.
Please input the Password!%
Use the command...
system-view
header incoming text
header login text
header legal text
header shell text
header motd text
97
Remarks
—
Optional
Optional
Optional
Optional
Optional