Configuring None Authentication For Aux Login; Configuring Password Authentication For Aux Login - HP A-F1000-E Getting Started Manual

Configuring none authentication for AUX login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the AUX port with password authentication and have user
privilege level 0 after login. For information about logging in to the device with the default configuration,
see "Configuration
Configuration procedure
Follow these steps to configure none authentication for AUX login:
To do...
Enter system view
Enter one or more AUX user
interface view
Specify the none authentication
mode
Configure common settings for
AUX login
After the configuration, next time you log in to the device through the AUX port, you are prompted to
press enter. A prompt such as <HP> appears after you press Enter, as shown in
Figure 25 Configuration page

Configuring password authentication for AUX login

Configuration prerequisites
You have logged in to the device.
requirements."
Use the command...
system-view
user-interface aux
first-number [ last-number ]
authentication-mode none
—
Remarks
—
—
Required
By default, password authentication is
performed for users that log in through the
AUX port.
Optional
See
AUX login
35
"Configuring common settings for
(optional)."
Figure 25.