Modem Login Authentication Modes; Configuring None Authentication For Modem Login - HP A-F1000-E Getting Started Manual

Modem login authentication modes

The following authentication modes are available for modem dial-in login: none, password, and
scheme.
none—Requires no username and password at the next login through modems. This mode is insecure.
•
• password—Requires password authentication at the next login through the console port. Keep your
password. If you lose your password, you cannot log in to the device through password authentication.
You can log in to the device through the console port to view or modify the password.
scheme—Requires username and password authentication at the next login through the console port.
•
Authentication falls into local authentication and remote authentication. To use local authentication,
configure a local user and related parameters. To use remote authentication, configure the username
and password on the remote authentication server. Keep your username and password.
The following table lists modem login configurations for different authentication modes:
Authentication
mode
None
Password
Scheme
NOTE:
Modem login authentication changes do not take effect until you exit the CLI and log in again.

Configuring none authentication for modem login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration
Configuration
Configure not to authenticate users
Configure to authenticate users by using the local
password
Set the local password
Configure the authentication scheme
Configure a
RADIUS/HWTACACS
Remote scheme
AAA
Configure the AAA scheme
authenti
Select an used by the domain
cation
authentic
Configure the username and
ation
password on the AAA server
scheme
Configure the authentication
Local
username and password
authenti
Configure the AAA scheme
cation
used by the domain as local
requirements."
48
Remarks
For more information, see
"Configuring none authentication
for modem login."
For more information, see
"Configuring password
authentication for modem
For more information, see
"Configuring scheme
authentication for modem
login."
login."