HP A-F1000-E Getting Started Manual page 43

High-end firewalls
Table of Contents

Advertisement

By default, you can log in to the device through the AUX port with password authentication and have user
privilege level 0 after login. For information about logging in to the device with the default configuration,
see
"Configuration
Configuration procedure
Follow these steps to configure scheme authentication for AUX login:
To do...
Enter system view
Enter one or more AUX user
interface views
Specify the scheme
authentication mode
Enable command
authorization
Enable command accounting
Exit to system view
requirements."
Use the command...
system-view
user-interface aux
first-number [ last-number ]
authentication-mode
scheme
command authorization
command accounting
quit
Remarks
Required
By default, the authentication mode for users
that log in through the AUX port is password.
Optional
By default, command authorization is not
enabled.
By default, command level for a login user
depends on the user privilege level. The user
is authorized the command with the default
level not higher than the user privilege level.
With the command authorization
configured, the command level for a login
user is determined by both the user privilege
level and AAA authorization. If a user
executes a command of the corresponding
command level, the authorization server
checks whether the command is authorized.
If yes, the command can be executed.
Optional
By default, command accounting is
disabled. The accounting server does not
record the commands executed by users.
Command accounting allows the
HWTACACS server to record all executed
commands that are supported by the device,
regardless of the command execution result.
This helps control and monitor user
operations on the device. If command
accounting is enabled and command
authorization is not enabled, every executed
command is recorded on the HWTACACS
server. If both command accounting and
command authorization are enabled, only
the authorized and executed commands are
recorded on the HWTACACS server.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A-f5000

Table of Contents