Figure 5-11. Sample Initial Usb To Uart Bridge Properties Window - Covidien Nellcor Series Operator's Manual

Click the Port Settings tab.
24.
Set the bits per second to one of the following baud rates: 19200 or 115200. The factory
25.
default is 19200 bps.

Note:
The monitoring system's baud rate setting must match the baud rate setting for the USB
to UART Bridge. Only a qualified service technician can change this setting.
Operator's Manual
Figure 5-11. Sample Initial USB to UART Bridge Properties Window
External Data Communication
5-15